Audiovox ECCO Specifications download pdf (Page 5)

5/12

128-8854

Page 5

Calibrate - Important - Do Not Skip

The unit stores magnetic data and automatically calibrates

its digital compass; however, if the unit cannot

provide correct heading information due to environment

change (for example, near a metal structure),

then it is recommended to manually calibrate the unit. It is

also recommended to manually calibrate the unit for

rst-time use.

Note: The digital compass may be affected by

bridges and power lines—move away from such

when using the unit.

1. Hold the unit face-up while in Ready mode. Press

and hold location 1 (e5) until the message

Hold at and press lock appears on the LCD;

then press and release lock button (e2).

2. The LCD message changes to Turn 360°

around and press lock. Slowly turn the unit

completely around face-up; then press and release

lock button (e2).

3. The LCD message changes to Turn

over 360°and press lock. Slowly

turn the unit face-down and

continue turning the unit until it is face-up

again. Press and release lock button

(e2).

4. The LCD message Calibrate complete

appears and the unit goes to Ready.

Note: If LCD message reads Calibrate incomplete,

follow steps 1–3 exactly.

Note: To exit Compass Calibration without

completing calibration, press and hold location 1

(e5). If successful, the messages Hold down to

exit and Ready appear. (If you release location 1

too soon, the message Calibrate compass

appears, and the unit remains in Compass Calibration

mode, waiting for Lock to be pressed.)

1 2 3 4 5 6 7 8 9 10 11 12

No comments

Audiovox ECCO Specifications Page 5