Audiovox ECCO Specifications download pdf (Page 7)

7/12

128-8854

Page 7

Return to a Location

1. To wake the unit from Sleep, press Return (e3) for 1

second or until the LCD backlight comes on. The

LCD message Ready appears.

2. To navigate to:

• Last-locked position: simply press return

button (e3).

• Another stored position: press return

button (e3) and location # (e5).

3. Follow the directional arrow (d4) on the LCD

toward the active location (d7). Other information

displayed on the LCD includes compass

direction (d5) and distance (d6).

Note: The unit remains on and active as long as it is

acquiring GPS data to update the direction and

distance information and you are moving more than

30 ft or 9 m every 5 minutes. If not, the LCD

message No Movement appears and the unit goes to

Sleep. Repeat step 1 to wake the unit up. When in

Ready mode, press return button (e3) and the unit

will resume the last selected course location.

4. If you travel off-course (that is, more than

22.5°, are headed in the opposite direction, or

the distance (d6) is increasing), the red LED indicator

(e1) ashes.

5. In the vicinity of 80 ft or 24 m from the active

location (d7), the proximity ring (d3) blinks

alternating large and small rings.

6. In the vicinity of 20 ft or 6 m, the LCD reads

Found, and the proximity ring (d3) blinks

large and small rings simultaneously.

7. After arriving, you can either select another

location or simply do nothing. The unit automatically

goes to Sleep after 2 minutes in the

Found mode (see “Sleep Versus Off” on page 8).

1 2 3 4 5 6 7 8 9 10 11 12

No comments

Audiovox ECCO Specifications Page 7