Audiovox PRO-9800 User Manual

128-65281 of 28Model PRO-9800Installation ManualRYSELECTABLE FEATURESNote : The method of manual override can either be selected to operate from the v

128-652810 of 2810Green w/ White trace Wire: Entry Illumination Ground OutputThis wire provides a 30 second ground output (300 mA Max.) whenever the

128-652811 of 28Orange Wire: Ground When Armed OutputThis wire provides a 300 mA ground output when the alarm circuit is armed to control the starter

128-652812 of 2812Green w/ Orange Trace Wire: Tachometer Input SignalThis wire will continually monitor the engine's tach rate while the unit is

128-652813 of 28Dark Blue Wire: Delayed 300mA Pulsed Channel 3 OutputThe Dark Blue wire supplies a 300mA ground pulsed output whenever channel three

128-652814 of 2814NOTE : This is a normally opened starter cut arrangement, and when power is removed from thesecurity system, the starter disable fea

128-652815 of 2815Black w/ Yellow Trace Wire: Ground Output During Start (Crank)The Black w/ Yellow Trace wire will provide a 300 mA ground output wh

128-652816 of 28163 Wire Positive Switched Door Locks:In this application, the Red wire of the door lock harness provides a + 12 volt pulse during th

128-652817 of 28The Red/Black wire provides a pulse ground output when the unlock button of the transmitter is pressed asecond time after disarming.

128-652818 of 2818NOTE: Resistive Circuits, As Well As 4 Wire Polarity Reversal and 5 Wire Alternating 12 VoltDoor Lock Control CircuitsThese applica

128-652819 of 2819 START PROGRAM:The Remote Start unit has the ability to start the vehicle automatically at timed intervals. This feature isuseful i

128-65282 of 28THIS PAGE INTENTIONALLY LEFT BLANK2

128-652820 of 28times in succession. The parking lights will flash, and the siren will chirp 3 times confirming thatselected feature 3 can be changed

128-652821 of 28TESTING YOUR INSTALLATION:WARNING!! The following procedure must be performed after the installation of an Audiovox Remote StartDevic

128-652822 of 2822To test the integrity of the Neutral Start Safety Circuit:1. Set the vehicle parking brake.2. Block the drive wheels to prevent ve

128-652823 of 28CAUTION!REMEMBER TO RECONNECT THE BROWN/BLACK WIRE TEMPORARILYDISCONNECTED IN STEP 3DO NOT RELEASE THIS VEHICLE TO THE CONSUMER UNTIL

128-652824 of 2824METHOD 2To connect to the key in sensor circuit as shown for method 2:A. Locate the control wire that connects the drivers door pin

128-652825 of 28COMPLETING THE INSTALLATION:After you have confirmed the operation of the Audiovox Remote Start unit and tested all the safety feature

128-652826 of 2826

128-652827 of 28THIS PAGE INTENTIONALLY LEFT BLANK

128-652828 of 28© 2003 Audiovox Electronics Corp., Hauppauge, NY 11788128-6528999.audiovo x.comFor Customer ServiceVisit Our Website AtProduct Informa

128-65283 of 28orEighth Press and release the valet switch 1 chirp = siren and horn outputPress transmitter Lock button to change 2 chirps = siren out

128-65284 of 28activated, (hood/trunk open), it will supply a ground to the input wire activating the alarm. In addition, thehood switch is required

128-65285 of 28SHOCK SENSOR:Select a centrally located, solid mounting surface for the shock sensor that will allow consistent opera-tion from all ar

128-65286 of 28YELLOW Wire: Starter OutputCareful consideration for the connection of this wire must be made to prevent the vehicle fromstarting whil

128-65287 of 28WIRING CONNECTIONS: Multi Pin Accessory Input/Output HarnessWhite w/ Red Trace Wire: Parking Light Flasher FeedThis wire is the common

128-65288 of 28White w/ Black Trace Wire: (+) Siren OutputThis is the positive siren feed wire. Route this wire through a grommet in the firewall to

128-65289 of 28Light Blue Wire: Ignition 3 OutputThis wire provides a 300mA ground output that becomes active 3 seconds before the Remote Start Unit