Audiovox MMD11A Installation Guide download pdf (Page 3)

MATERIALS INCLUDED IN THIS PACKAGE:

TOOLS REQUIRED:

#2 Phillips Screwdriver

#1 Phillips Screwdriver

Utility or Razor Knife or Shears

Wire Strippers

Upholstery hook tool (for removal of panels as necessary)

Electrical Tape

Masking Tape

Multimeter (to verify 12 volt DC and continuity: Do not use a test light or logic probe)

Marker pen – to mark headliner

Scribe (to mark trim ring if used)

Misc. electrical connectors (to connect to vehicle power source). Requirements will vary

from vehicle to vehicle)

DVD Movie (to verify system operation after installation)

(Optional)

1) 11" TFT LCD Overhead Monitor With DVD Player – (1pc)

2) 12 Pin Power / Signal harness (P/N 112-3483) – (1pc)

3) 2 Pin Power Wire Harness with choke (P/N 112B3143) – (1pc)

4) 9 Pin ~ 3 RCA Jack Pigtail (P/N 112-3682) – (1pc)

5) Hardware Package

Screws ISO 3 x 6mm Long – (10pcs)

#8 x 3/8" Self Drilling Screws – (4pcs)

M5 Screws – (4pcs)

6) Remote Control (P/N 136-4196) – (1pc)

7) Universal Mounting Bracket (P/N 108-3930) – (1pc)

8) Pry Tool (P/N 100-2424) – (1pc)

9) Trim Ring - Shale (P/N 102-4244) – (1pc)

- Pewter (P/N 102-4245) – (1pc)

10) Snap On Cover (Shroud) - Shale (P/N 102-4248) – (1pc)

- Pewter (P/N 102-4249) – (1pc)

Optional Accessories

11) Wireless Headphones (P/N MMIRHSNL) – (2pc)

12) SIRSWB Relay Box (P/N 112C3159) – (1pc)

(Optional)

1 2 3 4 5 6 7 8 ... 11 12

No comments

Audiovox MMD11A Installation Guide Page 3