Hooksett Fire –Rescue Department
Specifications for Stainless Steel Pumper Tanker Bid # 11-05
30
Bidder
Complies
Yes No
A self locking direct control shall be provided on the valve.
One (1) 3" NST Male Rigid to 5" Storz hard coated aluminum adapter shall be provided. (ref. TFT
AA2ST-NL)
One (1) 5" Storz cap and chain with a suction gasket shall be provided. (ref. TFT A01ST)
RIGHT REAR DIRECT TANK FILL
The tank fill shall be fitted with a swing out 1/4 turn 2-1/2" valve that is mounted to the tank with the
valve exposed on the rear of the apparatus body. The valve shall be equipped with a 30-degree drop
2-1/2" NST female swivel inlet with screen and mounted 48 inches from the ground height.
A self-locking direct control shall be provided on the valve.
One (1) 2-1/2" chrome plated rocker lug plug with chain shall be supplied (ref. Class1 107666).
APPARATUS BODY HOSEBED
The hosebed shall be constructed in such a manner that will prevent damage to fire hose. The
hosebed shall comply with the current NFPA requirements. The interior of the hosebed shall be free
of projections such as nuts, sharp edges or brackets that may damage hose. The hosebed and walls
shall be manufactured from stainless steel. No exceptions to this requirement are allowed.
An aluminum extrusion shall be installed over the rear opening of the hosebed to protect the body
from wear. The hosebed bottom shall be fitted with removable slatted, ribbed 6" heavy-duty extruded
aluminum floorboards.
ADJUSTABLE HOSE BED DIVIDERS
Two (2) adjustable hosebed dividers shall be provided. Each divider shall be fabricated from .250"
thick smooth aluminum plate, 5052-H32 alloy. The rear end of each divider shall have a 3" radius
corner and shall be sanded and deburred to prevent damage to hose. There shall be two hand hold
openings provided. One (1) at the rear in a vertical position and one (1) approximately 24 inches in
from the rear in a horizontal position.
HOSEBED COVER
A black vinyl hosebed cover shall be provided and designed to cover the entire main hosebed area.
The cover shall be installed with "stretch cord type" fasteners along each side of the hosebed. A sand
filled flap shall be incorporated into the rear edge of the cover. The hosebed cover rear flap shall have
a positive locking devices to hold firmly in place.
LEFT SIDE COMPARTMENT DIMENSIONS
FORWARD OF WHEEL WELL
There shall be one (1) low side, rescue style compartment ahead of the rear wheels. It shall have
approximate dimensions of 56" wide x 30" high x 24" deep. With one (1) adjustable shelf
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals