Hooksett Fire –Rescue Department
Specifications for Stainless Steel Pumper Tanker Bid # 11-05
36
Bidder
Complies
Yes No
DRI-DEK MATTING - SHELVES/TRAYS & COMPARTMENTS
All compartments and trays shall be covered with Dri-Dek mat for improved ventilation that shall also
provide a non-slip surface.
The Dri-Dek mat shall be black in color. Exposed compartment edges shall include a yellow tapered
edging.
ALUMINUM TOOL BOARDS
The upper half of the rear wall of four (4) exterior compartments shall be covered with aluminum
extrusion tool mounting board the board must be capable of being used without the need of vendor
specific fasteners to hold equipment mounts in place.
Tool mounting boards shall be installed on the upper back wall of R1, R2, R3, R4 compartments.
APPARATUS BODY ELECTRICAL SYSTEM
All body electrical shall conform to NFPA 1901 latest edition standards. The apparatus shall be
equipped with a heavy-duty 12-volt negative ground system.
All 12-volt apparatus wiring shall pass through a heavy duty power disconnect solenoid. The 12-volt
control of the power disconnect switch is to be triggered by the Master Battery Disconnect.
The apparatus shall be equipped with a Class1 Es-Key Management System for complete control of
the electrical system devices.
All Eskey wiring shall be color-coded and function coded to assist the technician in servicing the
electrical system. All circuits shall be divided and balanced for proper load distribution. Wiring shall be
routed in looms as a single harness. Heat resistant convoluted loom shall be used. Only solderless,
weatherproof insulated crimp automotive electrical connectors shall be used.
APPARATUS ICC MARKER LIGHTING
Two (2) amber Whelen OS Series LED side clearance lights shall be supplied, one (1) each side
mounted ahead of the forward body compartment. These lights are to be mounted in a chrome flange.
Five (5) red LED clearance lights shall be supplied, mounted in the rear of the apparatus.
Two (2) red LED clearance lights shall be supplied, mounted facing the side of the apparatus.
ICC lighting utilized and lighting positions shall be in conformance with FMVSS.
FRONT CORNER POLE MOUNTED GUIDE LIGHTS
Two (2) amber lights on chrome posts shall be provided mounted one each side on the front bumper
of the vehicle.
REAR STOP/TAIL/TURN/BACKUP LIGHTS
The rear of the apparatus shall be equipped with Federal Signal QuadraFlare 6"x4" lights. The top
light in the assembly shall be a red LED stop/tail light, Federal Signal model QL64Z-BTT. The middle
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals