Audiovox VME 9309TS Owner's Manual download pdf (Page 33)

NOTE:

For proper operation of the CD/DVD player, the chassis must be mounted within 20° of horizontal. Make sure the unit is mounted within this limitation.

4. Attach one end of the perforated support strap (supplied) to the screw stud on the rear of the chassis using the hex nut provided. Fasten

the other end of the perforated strap to a secure part of the dashboard either above or below the radio using the screw and hex nut provided.

Bend the strap to position it as necessary.

CAUTION! The rear of the radio must be supported witht he strap to prevent damage to the dashboard from the weight of the radio or improper opera-

tion due to vibration.

5. Replace any items you removed from the dashboard.

Final ISO-DIN Installation

1. Remove trim ring.

2. Mount factory brackets on new radio using existing screws from old radio.

3. Slide radio chassis into dash opening and secure.

4. Reinstall dash panel.

1 ... 32 33 34 ... 84

Comments to this Manuals

No comments

Audiovox VME 9309TS Owner's Manual Page 33

Comments to this Manuals