Audiovox VME 9309TS Owner's Manual download pdf (Page 38)

Subject to technical changes

Parking Brake Inhibit

• When the “PRK SW” cable is connected to the brake switch, the display on the TFT monitor will display video only when the vehicle is applied.

• Parking brake function is overridden when the video source is set to CAMERA.

Mute

Press the rotary encorder to mute the volume from the unit. Press the rotary encorder again to restore the volume. “MUTE” is displayed on the LCD.

OPERATING INSTRUCTIONS

Power On / Off

Press the /SRC button (7) on the unit to turn the unit on. The buttons on the front of the unit light up. Press and hold the button to power off

the unit. The monitor is drawn back into the main compartment.

Audible Beep Confirmation

An audible beep tone confirms each function selection. The Beep tone can be disabled through the Setup menu.

Playing Source Selection

To access the SOURCE MENU, touch the top left corner of the screen or press the SRC button on the front panel (7). Use the touch screen to change

the source through the SOURCE MENU.

Volume Adjustment

To increase or decrease the volume level, turn the rotary encoder (6) on the front panel. When the volume level reaches “0” or “40”, a beep sounds, indi-

cating that the adjustment limit has been reached. The volume ranges from “0” to “40”. The LCD or TFT screen displays the volume level for 3 seconds.

Programmable Turn-On Volume

This feature allows the user to select a turn-on volume setting regardless of the volume setting prior to turning the unitoff. To program a specific turn-on

volume level, turn the rotary encoder (6) to adjust the volume to the desired turn-onvolume. Push and hold the AUDIO button while the yellow speaker

icon and level indication is displayed on the screen.The unit will beep two times to confirm your turn-on volume setting.

Audio Control Menu

The Audio Control feature allows you to easily adjust your audio system to meet the acoustical characteristics of your vehicle, which vary depending on

the type of vehicle and its measurements. Proper setting of the Fader and Balance boosts the effects of the cabin equalizer. Press the EQ button on the

touchscreen once to display the audio menu. To adjust an audio feature:

Function Adjustment option

EQ User

Rock

Hip Hop

Dance

Latin

Rave

Urban

Acoustic

Adjustment of Bass/Mid/Treble seperately available

By push at the “EQ”-field you can choose between the pre adjusted EQ´s

FAD-BAL By push at the gridfield you can adjust the Fader/Balance accordingly.

1 ... 37 38 39 ... 84

Comments to this Manuals

No comments

Audiovox VME 9309TS Owner's Manual Page 38

Comments to this Manuals