Audiovox LF30S Datasheet download pdf (Page 11)

Connecting and Using

the IR Extender

The IR extender allows you to remotely control the A/V device

that is connected to the transmitter from the room you have the

receiver located in.

Connecting the IR Extender:

1. Extend the thin antenna upwards.

2. Plug in the IR extender into the connector on the back of

the transmitter.

3. Extend the IR extender cable to the front of the A/V device that

is connected to the transmitter.

4. Locate the IR window (dark, nearly opaque plastic) on the A/V

device connected to the transmitter. Look into the window and

try to locate the IR receiver behind the plastic.

5. Remove the adhesive pad on the IR extender and adhere it to

the window in front of the IR receiver on the A/V device

connected to the transmitter.

Controlling the A/V device remotely with your remote control:

Operate the A/V source’s remote control (the A/V device that is

connected to the transmitter) as you normally do while pointing

it at the receiver. The receiver wirelessly sends the infrared

command to the transmitter which then transmits it via the IR

extender to the A/V source device.

If you are having difficulty controlling the A/V device make sure

that you verify that your IR extender is positioned correctly in front

of the IR emitter on the device.

LF-30S

A/V device

IR Extender

IR window

Transmitter

AUDIO IN

EFT

RIGHT

VIDEO IN

XTENDER

DC 15v

+–

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 17 18 19

No comments

Audiovox LF30S Datasheet Page 11