Audiovox LF30S Datasheet download pdf (Page 12)

Connecting the Transmitter to

Audio Components

To enjoy sound from your CD player, cassette deck or other audio

component in another room, you can connect the transmitter

directly to that component. To use this feature, you must connect

either powered speakers, another stereo receiver, or an amplifier

to the receiver at the remote site.

1. Make sure the transmitter’s On/Off switch is “Off.”

2. Connect one set of A/V cables from the red and white AUDIO IN

jacks on the back of the transmitter to the LINE OUT audio

jacks on the back of your audio component. Be sure the red and

white plugs on the A/V cables match the red and white jacks on

both the transmitter and audio component. (The yellow video

plugs will not be used.)

3. Plug the small end of the power adapter into the back of the

transmitter and the other end into a standard A/C wall outlet.

Turn the On/Off switch to the “On” position.

4. Make sure the receiver and transmitter units are set to the

same channel.

5. Locate and orient the transmitter unit according to the

“Orienting the Transmitter and Receiver Units” (page 14)

section of this manual.

LF-30S

CD Player, Cassette Deck

AUDIO

INE OUT

RIGHTLEFT

Transmitter

UDIO IN

LEFT

IGHT

IDEO IN

IR

EXTENDER

DC 15v

+–

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19

No comments

Audiovox LF30S Datasheet Page 12