BODY FENDERS - POLISHED
The apparatus body fenders shall be made from 16 gauge polished stainless steel and shall be
rolled, die stamped and fully removable. The stainless steel fenders and stainless fender liners shall
be fastened with stainless bolts and ESNA nuts to the outer fender panel.
REAR AXLE MUD FLAPS
Two (2) black, anti-sail, mud flaps shall be mounted behind the rear wheels.
SCBA BOTTLE COMPARTMENTS
Four (4) SCBA bottle tube compartments shall be provided, two (2) in each side rear wheel well
area. Each compartment shall be constructed of gray molded storage compartment to provide
SCBA scuff protection. A door seal shall be provided at the perimeter of the SCBA compartment.
The doors shall be brushed stainless steel with a push button trigger latch.
SCBA BOTTLE RETENTION STRAP
One (1) one-inch (1") wide loop of red webbing shall be installed in each SCBA compartment to
prevent the bottle from sliding out of the compartment in the event the door is not latched for
travel. The loop shall be mounted, centered in the compartment and shall hang within one-inch
(1") of the compartment floor to allow the bottle to pass by the strap when the bottle is placed in the
compartment. The strap shall loop over the valve.
RIGHT SIDE COMPARTMENT DIMENSIONS
FORWARD OF WHEEL WELL - R1 & R2
There shall be two rescue style, full height compartment ahead of the rear wheels. The first
compartment shall have approximate dimensions of 56" wide x 77" high x transverse and the
second compartment shall have approximate dimensions of 52" wide x 77" high x transverse..
ABOVE WHEEL WELL - R3
There shall be one high side compartment centered over the rear wheels. It shall have approximate
dimensions of 52" wide x 47" high x transverse.
REAR OF WHEEL WELL - R4
There shall be one rescue style, full height compartment behind the rear wheels. It shall have
approximate dimensions of 51" wide x 77" high x 24" deep.
TRANSVERSE AREA
At the left rear of the R4 compartment there is a transverse area through to the forward section of
the L4 compartment with dimensions of 23" wide x 48" deep x 59" tall. This area is forward of the
RR1 compartment.
REAR COMPARTMENT DIMENSIONS
There shall be one (1) full height compartment at the rear of the body. It shall have approximate
dimensions of 48" wide x 77" high x 32" deep.
(124 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals