Hooksett Fire –Rescue Department
Specifications for Stainless Steel Pumper Tanker Bid # 11-05
33
Bidder
Complies
Yes No
a 1/8" aluminum removable inner liner that shall have a natural finish to provide reflective qualities
during night operations.
Both vertically hinged and horizontally hinged doors shall have gas shocks. A polished stainless steel
1/4" piano hinge shall be provided for each door.
The exterior of the doors shall be painted to match the main job color.
The right side door latches shall be Hansen slam latches, with a chrome "D" ring with a 5-degree bend
for easier grasping of each door handle with gloved hands.
REAR BODY REFLECTIVE CHEVRON STRIPING
The rear-facing vertical surfaces of the rear taillight panels and the rear body area, visible from the
rear of the apparatus, including the rear compartment door, shall be equipped with six (6) inch wide
retroreflective striping in a chevron pattern sloping downward and away from the centerline of the
vehicle at an angle of 45 degrees.
Each stripe in the chevron shall be a single color alternating between red (3M #-82) and yellow (3M # -
81).
UPPER THRU TANK COMPARTMENT
There shall be a thru tank storage area capable of holding 3 lengths of 6”x 15’ hard suction hose, a 24’
extension ladder and a 16’ roof ladder, a medical backboard, (2) 6’ Pike Poles. The layout of this
compartment will be decided at the pre-construction meeting.
BODY RUBRAIL - POLISHED STAINLESS STEEL
The apparatus body shall have a bolt on extruded, polished stainless steel rub rail affixed to the side
beneath each door area. The rub rail shall provide additional strength and protection and shall be
constructed of 3/8" x 1-1/2" stainless steel fastened with stainless steel fasteners. Each rub rail shall
be attached to the apparatus body with stand-off spacers made from 1" diameter Polyethylene bar
stock.
EXTERIOR COMPARTMENT LIGHTING
A minimum of two (2) compartment lights shall be provided for each body compartment. No exceptions
to this requirement. Each body door shall have an automatic compartment light switch.
REAR WORK LIGHTS
Two (2) recess mounted area work lamps shall be provided above the tailboard, one (1) each side on
the inner face of the beavertail. The lights shall be shall be automatically switched on when the
parking brake is set.
UNDERBODY LIGHTING
Underbody ground lights shall be provided under the apparatus body as required NFPA 1901. Four
(4) Truck-Lite model #60 ground lights shall be provided at the rear of the apparatus body, two (2)
each side, to illuminate under the rear compartments.
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals