Audiovox LF30S Datasheet download pdf (Page 13)

Connecting the Receiver to a TV

After connecting the transmitter to your A/V source, you must

connect the receiver to a TV or another component.

There are two ways to connect the LF-30S Receiver to a remote TV

(a TV in a remote location away from the A/V source):

1 - Connected directly to the remote TV

2 - Connected directly to a VCR, which is then connected to the TV

Note: If your TV has picture-in-picture (PIP) capability, you can

also view any image sent by the transmitter (such as a sleeping

baby monitored by your camcorder) in the small inset picture

while enjoying other programming on the rest of the screen.

Consult your TV owner’s manual for instructions on using its

PIP feature.

1. Make sure the receiver’s On/Off Switch is “Off.”

2. Connect one set of red, white and yellow A/V cables from the

A/V jacks on the back of the receiver to the LINE IN A/V jacks

on the back of the TV.

If your TV has A/V jacks (red, white and yellow for a stereo TV

or only white and yellow jacks for a mono TV), connect one end

of an A/V cable to the TV’s A/V jacks and to end of the cable to

the receiver.

Be sure the red, white and yellow plugs on the A/V cables match

the red, white and yellow jacks on both the receiver and the TV.

If your TV has only one input for audio (mono sound only), connect

the white plugs on the cable to that single audio input and to the

receiver’s AUDIO LEFT jack. If your TV does not have A/V jacks,

use a coaxial cable to connect the RF output jack of the receiver to

the coaxial input of the TV.

Note: If you already have an antenna or cable connected to your

TV, use an A/B switch or modulator (not included) and additional

coaxial cables to connect the receiver.

3. Plug the small end of the power adapter into the back of the

receiver and the other end into a standard A/C wall outlet. Turn

the On/Off switch to the “On” position.

4. Make sure the receiver and transmitter units are set to the

same channel.

5. Locate and orient the transmitter unit according to the

“Orienting the T

ansmitt

er and Rec

eiv

er Units” (page 14)

section of this manual.

LF-30S

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19

Comments to this Manuals

No comments

Audiovox LF30S Datasheet Page 13

Comments to this Manuals