Audiovox ACC-40 Operations Instructions download pdf (Page 86)

SECTION 8

APPLIANCES & INTERIOR FEATURES

8-2

The ON/OFF button (E) turns the refrigera-

tor on or off. If the button is pressed, it will turn

the refrigerator on and set the mode to auto.

When the refrigerator is on, pressing this button

for 2 seconds will turn the refrigerator off.

Pressing and holding the MODE button (C)

allows the user to cycle through the three mode

choices; one AUTO and two manual modes

(AC, LP GAS). The refrigerator will not switch

to the new operating mode until the mode button

is released.

The TEMP SET (thermostat) button (D) con-

trols the refrigerator and freezer temperature

during both gas and electric operation, eliminat-

ing the need to reset each time a different power

source is selected. Press and hold the TEMP

SET button to select the desired temperature set-

ting. The temperature settings are shown in the

form of a thermometer (A) in the display win-

dow, with the shortest thermometer reading indi-

cating the coldest setting.

Start-Up Instructions - Auto Mode

When the AUTO mode is selected, the oper-

ating control automatically selects the power

source using the following priority scheme:

• When 120 volts AC is available to the refrig-

erator, AUTO AC will be visible in the dis-

play panel, indicating the refrigerator is

operating on AC electric.

• If 120 volts AC is not available, the refriger-

ator will switch to the gas operation, and

AUTO LP GAS will be visible in the display

panel.

During operation in the AUTO mode, when

a higher priority power source becomes avail-

able, the operating controls will cease using the

current power source and will switch to the

higher priority power source. For example, if

AC electric becomes available while the refrig-

erator is operating in the AUTO LP GAS mode,

the refrigerator will switch to AUTO AC opera-

tion.

If an operating mode is not functional, a

diagnostic code will appear and the refrigerator

will attempt to operate in a lower power priority

source. If a lower power priority source is not

available, an alarm will sound and the refrigera-

tor will cease operation. Refer to the Diagnostic

Codes and Their Meaning for corrective actions.

Start-Up Instructions - Manual Mode

To operate in the MANUAL mode, press and

hold the MODE button (C) until AUTO disap-

pears and the desired operating mode is dis-

played. If the power source is interrupted while

operating in the MANUAL mode, a diagnostic

code will appear, an alarm will sound, and the

refrigerator will cease operation. For corrective

actions, refer to the Diagnostic Codes and Their

Meaning on page 10 of the Norcold Operator’s

Guide in the blue binder.

AUTO and MANUAL Modes - Gas Opera-

tion Only

If the gas does not ignite within 30 seconds,

which may occur on initial start-up, the refriger-

ator’s gas valve will automatically close and the

operating controls will select an alternate power

source (AUTO Mode) or MANUAL mode, will

revert to a stand-by mode in which an alarm will

sound and code A1 will be displayed in the cen-

ter window. The alarm and code will remain on

until the operating controls are turned OFF and

then ON again. If the gas does not ignite after

several attempts, check the input gas supply, or

consult with your dealer or a Norcold authorized

service center. A different mode of operation

may be selected by pressing and holding the

MODE button. The refrigerator will not switch

to the new operating mode until the MODE but-

ton is released.

Backup Operating System (BOS)

Your refrigerator features a Backup Operat-

ing System which keeps the refrigerator cool in

the event of a failure of the refrigerator’s operat-

ing controls. If a failure occurs, the refrigerator

AUTO LP GAS

AC BATT

MODE

TEMP

SET

OFF

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 123 124

Comments to this Manuals

No comments

Audiovox ACC-40 Operations Instructions Page 86

Comments to this Manuals

Related products and manuals for Cars Audiovox ACC-40