Audiovox ONYX User Manual download pdf (Page 24)

46 47

to select the FM channel.

vi. Start Using is highlighted.

Press the Select button.

vii. The FM channel you selected

will be conﬁrmed on the display

screen. The onyX will tune to

the FM channel.

9 You should hear XM channel 1

through your vehicle’s FM radio. If

you are satisfied with the sound

quality, you’re done! You are now

ready to activate your onyX.

10 If the selected FM channel doesn’t

work well for you, work down the

list of FM channels until you find

one that allows you to hear XM

clearly. Each time, you will need to

tune your vehicle’s FM radio to the

FM channel and then set your onyX

to transmit on the same FM channel

(steps 7 & 8).

If the signal reception is good, but there is no XM audio when tuned to channel 1,

verify that both the onyX and your vehicle’s FM radio are tuned to the same FM

channel (steps 7 & 8). Also ensure the chosen FM channel is a suitable one to use

in your area (step 5). Verify that nothing is plugged into the AUDIO connector

on the PowerConnect Vehicle Dock. Refer to “Troubleshooting” on page 102

for additional help.

Option 4: FM Direct Adapter (FMDA) Installation

The FMDA needs to be installed by a professional installer. Professional

installation can help improve your radio’s reception and signiﬁcantly reduce

the visibility of wires. To learn more, check with the retailer where you bought

your radio, or go to xmradio.ca/accessories.

Set your vehicle radio to the

above channel to enable audio.

99.3 FM

Vehicle Installation

FM Channels

current

FM 1

FM 2

FM 3

FM 4

FM 5

97.9

_ _ _

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 57 58

Comments to this Manuals

No comments

Audiovox ONYX User Manual Page 24

Comments to this Manuals

Related products and manuals for Radio Audiovox ONYX