Audiovox ONYX User Manual download pdf (Page 53)

104 105

If this happens: Try this:

No audio when using the Aux In

Cable or Cassette Adapter

•Check all cables between your onyX and your

vehicle’s stereo system for a ﬁrm and secure

connection.

•Ensure you have selected the proper input

source on your vehicle’s stereo system.

•If you are using the Vehicle Dock that came with

the Universal Xpress Car Kit, ensure that the

FM Transmitter in the onyX is turned Off, and

increase the audio level of the onyX. Refer to

“Set Audio Level” on page 89.

Audio sounds too soft •Raise the volume of your stereo system or

increase the audio level of your onyX until the

sound quality improves. Refer to “Set Audio

Level” on page 89.

Audio fades or has static when

listening

•Check all cables for a ﬁrm and secure connection.

•If you are using PowerConnect to listen via your

vehicle’s FM radio, and the problem persists,

it most likely is interference from another

commercial or broadcast FM station. You will

need to ﬁnd an unused or available FM channel

in your area. Refer to “Find Available FM

Channels in Your Area” on page 79.

•If you are using PowerConnect, and you cannot

solve the audio problem, try connecting the

audio using the Aux In Cable or a Cassette

Adapter. (Refer to page 39 and page 41.) If you

cannot use those solutions, consider using an

FM Direct Adapter. (Refer to page 47.)

Troubleshooting

If this happens: Try this:

No audio when using

PowerConnect or FMDA

•Check that your onyX and your vehicle’s FM

radio are tuned to the same FM channel.

•If you are using the Vehicle Dock that came with

the Universal Xpress Car Kit, ensure that the FM

Transmitter in the onyX is turned On. Refer to

“Turn FM Transmitter On/Off” on page 98 .

No song title or artist name is

displayed

•The information may not be available or updates

may be in progress.

Trafﬁc and Weather channels

sound different from other

channels

•These channels use a different audio technology

than other channels so they often sound

different from other channels.

The demo is playing •Your Magnetic Mount Antenna is not connected

or you are not receiving the signal. Check that

the antenna is connected properly and is not

obstructed.

•Press and hold the Select button for 10 seconds

to exit Demo Mode.

•You can disable Demo Mode. Refer to “Demo

Mode” on page 94.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58

Comments to this Manuals

No comments

Audiovox ONYX User Manual Page 53

Comments to this Manuals

Related products and manuals for Radio Audiovox ONYX