Audiovox D2016 - DVD Player - 10.2 Operations Instructions Page 100
- Page / 117
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
100
13
FAQ
Symptom Causes Remedy
AVNavigator does not inter-
act well with the receiver.
The receiver’s power is not turned
on.
Turn the receiver’s power on. (Wait about 60 seconds after
the power turns on for network functions to start.)
After this, press Detection in AVNavigator to redetect the
receiver.
To turn this unit’s power on and off from the Interactive
Manual, set Network Standby at HOME MENU d
System Setup d Network Setup to ON.
The receiver or computer is not con-
nected to the LAN.
Connect a LAN cable to the receiver or computer (page 33).
After this, press Detection in AVNavigator to redetect the
receiver.
The router’s power is off. Turn the router’s power on.
After this, press Detection in AVNavigator to redetect the
receiver.
AVNavigator’s network settings are
not correct.
If your router does not support DHCP or UPnP, the receiv-
er’s IP address must be set in AVNavigator. First set the
IP address on the receiver, then set the same address in
AVNavigator (page 88).
After this, press Detection in AVNavigator to redetect the
receiver.
Network connections could be
restricted due to the computer’s net-
work settings, security settings, etc.
Check the computer’s network settings, security settings,
etc.
After this, press Detection in AVNavigator to redetect the
receiver.
When the operating instructions
interactive mode is changed, the
settings may not be transferred to
the browser, causing AVNavigator to
stop interacting.
Either refresh the page’s display using the browser’s
refresh button or display a different page from the links so
that the setting is transferred.
When the
Wiring Navi, Operation Guide,
Interactive Manual or
Glossary is launched, a
warning about security
protection appears on the
browser.
This is because of the browser’s
security function.
This is not a problem. Perform the operation to authorize
the blocked contents.
Software updating does not
operate well.
There may be a problem with your
Internet Service Provider’s network.
Contact your contracted provider.
USB interface
Symptoms Causes Remedies
The folders/files stored on a
USB memory device are not
displayed.
The folders/files are currently stored
in a region other than the FAT (File
Allocation Table) region.
Store the folders/files in the FAT region.
The number of levels in a folder is
more than 9.
Limit the maximum number of levels in a folder to 9 (page
45).
The audio files are copyrighted.
Copyrighted audio files stored on a USB memory device
cannot be played back (page 45).
A USB memory device is
not recognized.
The USB memory device does not
support the mass storage class
specifications.
Try using a USB memory device compatible with the mass
storage class specifications. Note that there are cases
where even the audio files stored on a USB memory device
compatible with the mass storage class specifications are
not played back on this receiver (page 45).
Connect the USB memory device and switch on this
receiver (page 35).
A USB hub is currently being used.
This receiver does not support USB hubs (page 45).
This receiver recognizes the USB
memory device as a fraud.
Switch off and on again this receiver.
Reconnect the USB device with the receiver switched off.
Change to an input other than iPod/USB, then set the input
back to iPod/USB.
A USB memory device is
connected and displayed,
but the audio files stored
on the USB memory device
cannot be played back.
Some formats of USB memory
devices, including FAT 12, NTFS, and
HFS, cannot be played back on this
receiver.
Check whether the format of your USB memory device is
either FAT 16 or FAT 32. Note that the FAT 12, NTFS, and
HFS formats cannot be played back on this receiver (page
45).
The file format cannot be properly
played back on this receiver.
See the list of file formats that can be played back on this
receiver (page 46).
iPod
Symptoms Causes Remedies
iPod is not recognized. This receiver recognizes the iPod as
a fraud.
Switch off and on again this receiver.
Reconnect the iPod with the receiver switched off.
Change to an input other than iPod/USB, then set the input
back to iPod/USB.
- SC-1223-K 1
- IMPORTANT 2
- ESTABLISH A SAFE LEVEL: 3
- GUIDELINES: 3
- Contents 4
- 11 The Advanced MCACC menu 5
- 14 Additional information 5
- Important 6
- Checking what’s in the box 8
- Our philosophy 8
- Features 8
- Installing the receiver 9
- Loading the batteries 9
- Before you start 10
- Using AVNavigator for Mac 11
- Controls and displays 12
- Front panel 16
- Connecting your equipment 18
- Rear panel 19
- Placing the speakers 21
- Connecting the speakers 22
- Selecting the Speaker system 24
- About the audio connection 24
- About the video converter 25
- Connecting using HDMI 26
- Connecting external antennas 31
- Making MULTI-ZONE connections 32
- Connecting an iPod 34
- Connecting a USB device 35
- Connecting to a wireless LAN 35
- Connecting an IR receiver 36
- Plugging in the receiver 36
- Basic Setup 37
- The Input Setup menu 39
- Operation Mode Setup 40
- About the Home Menu 41
- Basic playback 42
- Playing a source 43
- Playing an iPod 44
- Playing a USB device 45
- About playable file formats 46
- Listening to the radio 47
- Listening to your system 50
- Front left 52
- speaker 52
- Front right 52
- speaker 52
- Selecting MCACC presets 53
- Choosing the input signal 53
- Introduction 55
- About HTC Connect 56
- Basic playback controls 56
- About network playback 58
- Music files 59
- Control with HDMI function 60
- HDMI Setup 61
- Before using synchronization 62
- About synchronized operations 62
- Setting the PQLS function 62
- Using other functions 64
- Audio parameter menu 65
- Video parameter menu 67
- Using the MULTI-ZONE controls 69
- Using the sleep timer 70
- Dimming the display 70
- Switching the HDMI output 70
- Checking your system settings 70
- Default system settings 71
- About the Remote Setup menu 73
- Operating multiple receivers 73
- RECEIVER 74
- Direct function 75
- (Discrete On) functions 75
- TV and Audio/Video components 76
- Button(s) TV (Projector) 77
- The Advanced MCACC menu 78
- Automatic MCACC (Expert) 79
- Manual MCACC setup 80
- Checking MCACC Data 83
- Data Management 83
- Manual speaker setup 86
- Room size (ft 87
- Network Setup menu 88
- MHL Setup 89
- The Other Setup menu 89
- Auto Power Down 90
- Volume Setup 90
- Remote Control Mode Setup 90
- Software Update 90
- ZONE Setup 91
- On Screen Display Setup 91
- Play ZONE Setup 91
- Troubleshooting 95
- No sound 95
- Other audio problems 96
- ADAPTER PORT terminal 97
- Settings 97
- Remote control 98
- AVNavigator 99
- USB interface 100
- Symptoms Causes Remedies 101
- Web Control 102
- Wireless LAN 102
- Additional information 103
- HTC Connect 104
- Surround sound formats 104
- About HDMI 104
- About iPod 105
- Windows 7 105
- Software license notice 105
- Speaker Setting Guide 106
- Cleaning the unit 108
- Glossary 109
- Features index 112
- Specifications 113
- Preset code list 114
- In the USA/Aux Etats-Unis 117
- In Canada/Aux Canada 117
Related products and manuals for AV receivers Audiovox D2016 - DVD Player - 10.2
AV receivers Audiovox PEQ-200 Owner's Manual
(100 pages)
(100 pages)
AV receivers Audiovox ADC700 Owner's Manual
(73 pages)
(73 pages)
© 2020, manymanuals.com. All rights reserved. | 1.541 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals