Audiovox AOM-713WP Specifications Page 106

  • Download
  • Add to my manuals
  • Print
  • Page
    / 171
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 105
Proposal Number PSDF #P09-0004
Reverse - 5.03
The transmission shall be able to shift from first through fifth gear without operator intervention. The
chassis shall be geared for the top speed in 5th gear.
TRANSMISSION RANGE SELECTOR
The transmission shall be controlled by a push button type shift control. It shall be internally illuminated for
night operation.
TRANSMISSION OIL LEVEL SENSOR
The transmission shall be equipped with the oil level sensor (OLS). This sensor shall allow the operator to
obtain an indication of the fluid level from the shift selector. The sensor display shall provide the following
checks, correct fluid level, low fluid level and high fluid level.
DRIVELINES
Universal joints and driveshafts shall be SPICER 1710 series or equal. The driveshaft tube shall be a
minimum of 4.0" diameter with a .134" tube wall thickness. The driveshaft slip joints shall be coated to
reduce sliding friction and thrust under high torque loads. Permanent driveline installations shall be balanced
to prevent vibration.
FUEL TANK
The fuel tank shall have a capacity of 50 gallons (US) and be D.O.T. certified. It shall be mounted with
straps bolted to the bottom frame flange to allow for easy removal. The tank construction shall be of 12
gauge steel with single fuel pickup and return tubes. The baffled tank shall be vented to prevent low vacuum
and facilitate rapid filling.
The tank shall have a 2" NPT fill to the driver's side of the chassis.
The fuel tank sending unit is to be mounted to the driver's side
of the fuel tank for easy replacement without
removing body panels.
FUEL LINES
Polyamide fiber, nylon braided, reinforced tubing with push-on reusable fittings shall be provided for the
chassis fuel lines.
FUEL SHUT-OFF VALVE
A, ball type, fuel line shut off valve shall be installed in the suction side fuel line. The shut off valve shall be
located near the inlet to the primary fuel filter.
FUEL/WATER SEPARATOR
The Cummins engine shall be equipped with an integrated fuel / water separator with a self venting bottom
drain valve. This filter shall be able to remove up to 95% of dissolved water and up to 99% of free standing
water.
Page 106
Page view 105
1 2 ... 101 102 103 104 105 106 107 108 109 110 111 ... 170 171

Comments to this Manuals

No comments