Audiovox AOM-713WP Specifications download pdf (Page 136)

Proposal Number PSDF #P09-0004

PUMP PANEL LIGHTING

The pump operator's panel shall be supplied with a LED light system. LED strip lights with a stainless steel

hood shall be mounted across the top of the pump panel gauges and controls.

LED strip lights with a stainless steel hood shall be provided on each side of the pump module above the side

panels.

All pump module lighting shall illuminate when the parking brake is engaged.

AIR HORN ACTIVATION SWITCH

A switch shall be located on the pump panel to activate the chassis air horn. The switch shall be a

momentary pushbutton type switch with a red cover. The switch shall be supplied with the proper

identification label.

WATER TANK LEVEL GAUGE

The apparatus shall be equipped with a Class 1 "Inteli-Tank" Tank Level Gauge, or equal, for indicating

water level. The tank level gauge shall indicate the liquid level on an easy to read LED display and show

increments of 1/8 tank capacities. The tank level gauge system shall include a pressure transducer that shall

be mounted on the outside of the tank in an easily accessible area, a super bright LED four-light display with

a visual indication at nine (9) accurate levels, and a set of weather resistant connectors to connect to the

digital display, to the pressure transducer and to the apparatus power.

FOAM TANK LEVEL GAUGE

The apparatus shall be equipped with a Class 1 "Inteli-Tank" foam tank level gauge for indicating foam

level. The foam tank level gauge shall indicate the foam concentrate level on an easy to read LED display

and show increments of 1/8 tank capacity. The foam tank level gauge system shall include:

A pressure transducer that shall be mounted on the outside of the tank in an easily accessible area. A super

bright LED four-light display with a visual indication at nine accurate levels. A set of weather resistant

connectors to connect to the digital display, to the pressure transducer and to the apparatus power.

HEAT EXCHANGER DISCHARGE

A gated discharge line shall be installed to provide water from the fire pump to the chassis supplied heat

exchanger to assist in engine cooling during pumping operations. The heat exchanger line shall be controlled

at the pump operator's panel with a Class 1 valve.

PUMP MANUFACTURER AND MODEL

The pump shall be a Hale Q-MAX model 1500 gpm midship pump.

PUMP RATING AND TEST REQUIREMENTS

The pump shall be of a size and design to mount on the chassis rails of commercial and custom truck chassis,

and have the capacity of 1500 gallons per minute (U.S. GPM), NFPA 1901 rated performance. The pump

Page 136

1 2 ... 131 132 133 134 135 136 137 138 139 140 141 ... 170 171

No comments

Audiovox AOM-713WP Specifications Page 136