Audiovox Platinum APS-510a User Manual download pdf

128-6520

1 of 8

Model APS-510a

Installation Manual

Note: The method of manual override can either be selected to operate from the valet switch or operate as custom

code. Be certain to place a check mark indicating the method used in the box located on the last page of the

owner's manual.

Note: When both Passive Arming and Voltage Sensing are selected, you must hardwire the driver’s door pin

switch in order to begin the passive arming sequence.

RF Programmable Features :

Feature Selection 1 Chirp 2 Chirps 3 Chirps 4 Chirps Default

1st Door L/UL 1 Sec. 3.5 Sec. 1 Sec L, Dbl. U/L 1 Sec.

2nd Accy Lock Auto Lock On Auto Lock Off Auto Lock Off

3rd Accy. UL Auto UL Dr Auto UL All Auto UL Off Auto UL Off

4th Headlights On Arm On Disarm On Both Off Both

5th Passive Locks Passive Active Active

6th Passive/Active Arm Passive Arm Active Arm Active Arm

7th Voltage Sense Voltage Sense Hardwire Hardwire

8th Siren/Horn Siren/Horn Siren Only Horn Only Siren/Horn

9th Horn Chirp 10mS 16mS 30mS 16mS

10th Override Method Custom Code Valet Valet

11th Two Step Unlock On Off Off

12th Chirp Delete From Tx On Off Off

To program these selectable features;

Action System Response

Turn ignition on No response

Press and release the valet switch 3 times 1 Chirp - LED 1 flash

Within 3 seconds, turn ignition Off Short chirp, then long chirp

First Then On 1 chirp = 1 second door locks

Press transmitter Lock button to change 2 chirps = 3.5 second door locks

Press transmitter Lock button to change 3 chirps = 1 sec. lock, dbl 1 sec. unlock

Second Press and release the valet switch 2 chirps = auto locks off

Press transmitter Lock button to change 1 chirp = auto locks on

Third Press and release the valet switch 3 chirps = auto unlock off

Press transmitter Lock button to change 1 chirp = auto unlock drivers door only

Press transmitter Lock button to change 2 chirps = auto unlock all doors

Fourth Press and release the valet switch 3 chirps = headlight output when arming and disarming

Press transmitter Lock button to change 4 chirps = headlight output off

Press transmitter Lock button to change 1 chirp = headlight output when arming

Press transmitter Lock button to change 2 chirps = headlight output when disarming

1 2 3 4 5 6 7 8

Model APS-510a 1
128-6520 2

Summary of Contents

Page 1 - Model APS-510a

128-65201 of 8Model APS-510aInstallation ManualNote: The method of manual override can either be selected to operate from the valet switch or operate

Page 2 - 128-6520

128-65202 of 8Page 2Fifth Press and release the valet switch 2 chirps = active locksPress transmitter Lock button to change 1 chirp = passive locksorS

Page 3

128-65203 of 8Page 3Do not mount the control module in the engine compartment, as it is not waterproof. You should also avoidmounting the unit directl

Page 4

128-65204 of 8Page 4Note: This is a normally closed starter cut arrangement, and when power is removed from thesecurity system, the starter disable fe

Page 5

128-65205 of 8Page 5Cut the low current starter solenoid wire in the vehicle, and connect one side of the cut wire to relayterminal 87. Connect the ot

Page 6

128-65206 of 8Page 6after a first unlock command was issued. This is used for second step unlock or all doors unlock in a twostep circuit. In this a

Page 7

128-65207 of 8The Red/Black wire provides a pulse ground output when the unlock button of the transmitter is pressed asecond time after disarming. Be

Page 8

Comments to this Manuals

No comments

Audiovox Platinum APS-510a User Manual

Browse online or download User Manual for Sensors Audiovox Platinum APS-510a. Audiovox Platinum APS-510a User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Sensors Audiovox Platinum APS-510a