Audiovox P-87S User Manual download pdf (Page 4)

-2-

pressed to decrease the volume quickly. The display will

automatically return to the priority indication 5 seconds after the

last volume adjustment or when another function is activated.

This button is also used in conjunction with the Select button 3

to adjust the bass, treble, balance, and fader levels as described

in 4, 5, 6 and 7.

3 SELECT BUTTON (SEL)

DISPLAY CALL

DISPLAY PRIORITY SELECTOR

IGNITION-OFF CLOCK CALL (CLK)

This button is used to select the audio function (volume, bass,

treble, balance, or fade) to be adjusted using the Level Control 2,

as well as the indication (time or frequency/cassette/disc) shown

on the display panel. Momentary presses of the button will change

the display from radio frequency/cassette/disc indication to clock

time. After 5 seconds, the display will automatically return to the

priority setting.

During CD changer operation, a momentary press of the button

will change the display from disc/track number to CD track elapsed

time. Another press of the button will change to clock time.

After 5 seconds, the display will automatically return to disc/track

number if set to CD track display priority. If the unit has been set

to clock time display priority, momentary presses of the button

will change the display to CD disc/track number and then CD

elapsed time. After 5 seconds, it will change back to clock time

display. If the unit has been set to elapsed time priority, momentary

presses of the button will change the display to clock time and

then CD disc/track number.

Additional momentary presses of the button will set the unit for

bass adjustment (level number above “BAS” will flash on display

panel), treble (level number above “TRE” will flash), balance (“BAL”

on display), fader (“FAD”) or volume (level number). The display

will automatically return to the normal indication 5 seconds after

the last adjustment is made or when another function is activated.

This unit can be set so that the radio frequency/cassette/disc

indication (factory setting) or clock time will appear on the display

panel as the priority setting. To change the priority setting, press

and hold the Select button for 2 seconds until the display changes

to the next indication. That indication will now be the priority

setting and the display will automatically return to that indication

after any radio, cassette, disc or audio function is displayed.

NOTE: When changing the display priority setting, release the

button as soon as the display changes (approximately

2 seconds). Holding the button in for too long will put the

unit into time setting mode (flashing time display). See

section on “Setting the Clock”.

To check the time with the vehicle ignition switch in the “off”

position, momentarily press the Select button. The display will

illuminate and show the time and then automatically shut off after

5 seconds.

4 BASS CONTROL

To adjust the bass level, first select the Bass mode by pressing

the Select button 3 so that the level number above the “BAS”

1 2 3 4 5 6 7 8 9 ... 15 16

Comments to this Manuals

No comments

Audiovox P-87S User Manual Page 4

Comments to this Manuals

Related products and manuals for Acoustics Audiovox P-87S