Audiovox P-87S User Manual download pdf (Page 6)

-4-

NOTE: Momentary presses of the button will change the radio

sensitivity in Seek and Scan Tuning modes from Local to

Distant and back again as described in section bn.

9 AM/FM BAND SELECTOR (BND)

AUTO-STORE TUNING (AS)

MODE SELECTOR

During radio operation, each momentary press of this button will

change the radio band. The indication “AM”, “FMI”, or “FMII” will

appear on the display panel according to your selection.

Pressing and holding the button for longer than 2 seconds will

activate the Auto-Store Tuning function which will automatically

scan the AM or FMII bands and enter strong stations into the

pre-set memory positions for that band. If you have already set

the pre-set memories on the AM or FMII bands to your favorite

stations, activating the Auto-Store feature will erase those stations

and enter new ones. This feature is most useful when traveling in

a new area where you are not familiar with the local stations.

Momentary presses of this button are also used to select the

audio source or mode in play. During tape play, it can be used to

change to radio mode without ejecting the cassette ( IN indication

will remain on display panel to show that a cassette is still loaded in

the unit). Similarly, it can be used to go back to tape mode from

radio play. If an optional CD changer is connected to the unit, this

button is also used to select CD changer operation as described in cq.

bl MANUAL UP/DOWN TUNING

AUTOMATIC SEEK TUNING

Each time the + button is tapped, the radio will tune one frequency

step higher. Similarly, each tap of the – button will tune one

frequency step lower. To manually tune in a station, tap the button

of the appropriate direction until the desired frequency is reached.

Pressing either button for longer than 0.5 seconds and then

releasing will activate the Automatic Seek Tuning function. The

radio will seek the next available station and stop at that frequency.

The Seek function can be stopped by pressing the button again or

activating any other tuning function.

Pressing either button for longer than 0.5 seconds will cause the

radio to continue tuning rapidly in the selected direction until the

button is released, at which point it will seek to the next available

station.

bm AUTOMATIC SCAN TUNING

During radio operation, press this button to scan the stations on

the band in use, stopping at each one for 5 seconds before

continuing to the next station (the frequency on the display panel

will flash during Scan mode operation). When a desired station is

reached, press the button again to stop the Scan function and

remain on the selected frequency. Scan mode will also be

canceled by activating any other tuning function.

bn LOCAL/DISTANT SELECTOR (LO/DX)

This feature is used to select the strength of the signals at which

the radio will stop during Automatic Seek and Scan Tuning.

Momentarily pressing the button will select the Local setting

(“LOC” will appear on the display panel) and only strong (local)

stations will be received. Momentarily pressing the button again

will select the Distant setting (“LOC” will disappear from the

1 2 3 4 5 6 7 8 9 10 11 ... 15 16

Comments to this Manuals

No comments

Audiovox P-87S User Manual Page 6

Comments to this Manuals

Related products and manuals for Acoustics Audiovox P-87S