Audiovox P-87S User Manual download pdf (Page 5)

-3-

indication is flashing. Within 5 seconds of choosing the Bass

mode, press the + or – side of the button of the Level control 2 to

adjust the bass response as desired. The bass level will be shown

on the display panel from a minimum of –7 to a maximum of 7 (0 is

flat response). The display will automatically return to the normal

indication 5 seconds after the last adjustment or when another

function is activated.

5 TREBLE CONTROL

To adjust the treble level, first select the Treble mode by pressing

the Select button 3 so that the level number above the “TRE”

indication is flashing. Within 5 seconds of choosing the Treble

mode, press the + or – side of the button of the Level control 2 to

adjust the treble response as desired. The treble level will be

shown on the display panel from a minimum of –7 to a maximum

of 7 (0 is flat response). The display will automatically return to

the normal indication 5 seconds after the last adjustment or when

another function is activated.

6 LEFT/RIGHT BALANCE CONTROL

To adjust the left-right speaker balance, first select the Balance

mode by pressing the Select button 3 so that the “BAL” indication

appears on the display panel. Within 5 seconds of choosing the

Balance mode, press the + side of the button of the Level Control 2

to adjust the stereo balance to the left channel speakers or

the – side of the button to adjust it to the right channel speakers.

When the volume level between the right and left channels is equal,

“0

0” will be shown on the display panel. Adjusting the balance

toward the right will increase the number on the right side of the

display to a maximum of “0

9” (full right). Adjusting the

balance toward the left will increase the number on the left side of

the display to a maximum of “9

0” (full left). The display will

automatically return to the priority indication 5 seconds after the

last adjustment or when another function is activated.

7 FRONT/REAR FADER CONTROL

To adjust the front-rear speaker balance, first select the Fader

mode by pressing the Select button 3 so that the “FAD” indication

appears on the display panel. Within 5 seconds of choosing the

Fader mode, press the + or the – side of the button of the Level

Control 2 to adjust the front-rear speaker levels as desired. When

the level of the front and rear speakers is equal, “0

0” will be

shown on the display panel. Adjusting the fader toward the front

speakers will increase the number on the left side of the display

to a maximum of “9

0” (full front). Adjusting the fader toward the

rear speakers will increase the number on the right side of the

display to a maximum of “0

9” (full rear). The display will auto-

matically return to the priority indication 5 seconds after the last

adjustment or when another function is activated.

8 LOUDNESS CONTOUR (LD)

Pressing this button for longer than 2 seconds will activate the

Loudness Contour as indicated by “LOUD” on the display panel.

When listening to music at low volume levels, this feature will

boost the bass and treble ranges to compensate for the

characteristics of human hearing. Pressing the button again for

longer than 2 seconds will deactivate the feature and “LOUD” will

disappear from the display panel.

1 2 3 4 5 6 7 8 9 10 ... 15 16

Comments to this Manuals

No comments

Audiovox P-87S User Manual Page 5

Comments to this Manuals

Related products and manuals for Acoustics Audiovox P-87S