Audiovox D2016 - DVD Player - 10.2 Instruction Manual download pdf (Page 59)

Speciﬁcations

Amplifier Section

Video Section

Tuner Section

■

General

■

Video Inputs

■

Video Outputs

■

Audio Inputs

■

Audio Outputs

Speciﬁcations and features are subject to change without

notice.

Power output:

All channels:

75 W (8

Ω

, 20 Hz–20 kHz, FTC)

105 W (6

Ω

, 1 kHz, DIN)

130 W (6

Ω

, 1 kHz, EIAJ)

Dynamic power: 2 x 180 W (3

Ω

, front)

2 x 150 W (4

Ω

, front)

2 x 95 W (8

Ω

, front)

THD (total harmonic

distortion): 0.08% (rated power)

Damping factor: 60 (front, 1 kHz, 8

Ω

)

Input sensitivity and

impedance: 200 mV/47 k

Ω

(LINE)

Output level and

impedance: 200 mV/470

Ω

(REC OUT)

Frequency response: 10 Hz–100 kHz/+1 dB, –3 dB (Direct

mode)

Tone control: ±12 dB, 50 Hz (BASS)

±12 dB, 20,000 Hz (TREBLE)

S/N ratio (Direct mode): 100 dB (CD, IHF-A)

Speaker impedance: 6

Ω

Input sensitivity, output

level and impedance: 1.0 Vp-p/75

Ω

(component and S-Video

0.7 Vp-p/75

Ω

(component P

, P

)

0.28 Vp-p/75

Ω

(S-Video C)

1.0 Vp-p/75

Ω

(composite)

Component video

frequency response: 5 Hz–50 MHz

Tuning frequency range: 87.5–108.0 MHz

Usable sensitivity: FM STEREO 17.2 dBf, 2.0 µV (75

Ω

IHF)

FM MONO 11.2 dBf, 1.0 µV (75

Ω

IHF)

S/N ratio: FM STEREO 70 dB (IHF-A)

FM MONO 76 dB (IHF-A)

THD: FM STEREO 0.3% (1 kHz)

FM MONO 0.2% (1 kHz)

FM stereo separation: 45 dB at 1 kHz

Tuning frequency range: 530–1700 kHz (American model)

522–1611 kHz (Other models)

Usable sensitivity: 30 µV

S/N ratio: 40 dB

THD: 0.7%

Power supply: American model: AC 120 V, 60 Hz

Worldwide model: AC 220–230 V and

120 V switchable 50/60 Hz

Other models: AC 230–240 V, 50 Hz

AC 220–230 V, 50 Hz

Power consumption: American model: 4.6 A

Other models: 370 W

Standby power

consumption: 2.5 W

Dimensions

(W x H x D): 17-1/8" x 5-7/8" x 14-13/16"

(435 x 150 x 376 mm)

Weight: American, European and Australian

models: 22.5 lbs. (10.2 kg)

Asian model: 24.3 lbs. (11.0 kg)

Component video inputs:2 (DVD, Video 1/2/3)

S-Video inputs: 4 (DVD, Video 1–3)

Video inputs: 4 (DVD, Video 1–3)

Component video

outputs: 1 (Component Video Out)

S-Video outputs: 2 (Video 1 Out, Monitor Out)

Video outputs: 2 (Video 1 Out, Monitor Out)

Digital inputs: 4 (Optical 1–3, Coaxial)

Analog inputs: 6 (CD, Tape, DVD, Video 1–3)

Multichannel analog

inputs: 5.1 ch (Front L/R, Center, Surround L/R,

Subwoofer)

Analog outputs: 2 (Tape Out, Video 1 Out)

Subwoofer pre out: 1

Speaker outputs: 6+2

Phones: 1

• The AV Receiver contains a microcomputer for signal processing and control functions. In very rare situations,

severe interference, noise from an external source, or static electricity may cause it to lockup. In the unlikely even

that this should happen, unplug the power cord from the wall outlet, wait at least ﬁve seconds, and then plug it back

in again. That should ﬁx it.

•To reset the AV Receiver to its factory defaults, turn it on and, while holding down the [VIDEO 1] button, press the

[STANDBY/ON] button. “Clear” will appear on the display and the AV Receiver will enter Standby mode.

1 2 ... 54 55 56 57 58 59 60

Comments to this Manuals

No comments

Audiovox D2016 - DVD Player - 10.2 Instruction Manual Page 59

Comments to this Manuals

Related products and manuals for AV receivers Audiovox D2016 - DVD Player - 10.2