Audiovox ONYX User Manual download pdf (Page 23)

44 45

5 You’ll first need to find an available FM channel. An available FM

channel is one that’s not being used by an FM radio station in your

area. When you tune your FM radio to an available channel, you should

only hear static or silence – not talk or music. To find an available FM

channel:

• ManuallytunethroughyourlocalFMchannelsonyourvehicle’sFM

radio. Locate and create a list of channels that aren’t being used by any

FM radio station. Write down the list. Once you have created your list

of available FM channels, you will need to ﬁnd the one that provides the

best match for onyX.

TIP! You’ll need to use the ‘Manual’ tune function on your vehicle’s FM radio to

tune through every FM channel one-by-one. Turn on your vehicle’s FM radio. Start

at 88.1 and use the ‘Manual’ tune function on your vehicle’s FM radio to tune

through each FM channel one-by-one (88.1 followed by 88.3 etc.) to locate

channels that aren’t being used by a local FM radio station. Write down each FM

channel that has only static or silence on it, until you reach 107.9.

6 Ensure onyX is tuned to channel 1. Upon power up, onyX should tune to

channel 1 by default, when it’s not yet activated. If it’s not on channel 1,

refer to “Listening to Satellite Radio” on page 55 to learn about how to

tune a channel.

7 Pick the first FM channel on your list from step 5. Turn on your vehicle’s

FM radio (if you have not already done so) and tune it to this FM channel.

NOTE! If you are using the Vehicle Dock from the Universal Xpress Car Kit

instead of the PowerConnect Vehicle Dock which came with your onyX, you

will have to disable AUX Detect. Refer to “Using the

Vehicle Dock From the Universal Xpress Car Kit” on

page 96 , and complete the additional instructions

before continuing with the next step.

8 Set your onyX to transmit on the same FM

channel that you have selected in step 7:

i. Press menu.

ii. Press

to scroll to and highlight FM Settings and press the

Select button.

iii. FM Channels will be highlighted. If it is not highlighted, turn on

the FM transmitter by highlighting FM transmitter and pressing

Select.

iv. Once the FM Transmitter is On, select

FM Channels

and press

to scroll to and highlight the storage location FM2 and

press the Select button.

v. Tune to the available FM channel you found in step 7. Press

and to tune in steps of .2, i.e., 99.3 to 99.5. Press and

to tune in steps of 1, i.e., 99.3 to 100.3. Press the Select button

3 4 5 6 7 8 9 0

direct

jump

90.1

MATCH FM CHANNELS

Vehicle Installation

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 57 58

Comments to this Manuals

No comments

Audiovox ONYX User Manual Page 23

Comments to this Manuals

Related products and manuals for Radio Audiovox ONYX