Audiovox D2016 - DVD Player - 10.2 Instruction Manual download pdf (Page 30)

Connecting the TX-SR502/TX-SR502E

—Continued

With (Remote Interactive) you can control your

-compatible Onkyo CD player, DVD player, and so

on with the TX-SR502/TX-SR502E’s remote controller,

and use the following special functions:

Auto Power On/Standby

When you start playback on a component connected via

, if the TX-SR502/TX-SR502E is in Standby, it will

turn on and select that component as the input source

automatically. Similarly, when the TX-SR502/

TX-SR502E is set to Standby, all components connected

via also enter Standby. This function will not work

if the component’s power cord is connected to the

TX-SR502/TX-SR502E’s AC OUTLET.

Direct Change

When playback is started on a component connected via

, the TX-SR502/TX-SR502E automatically selects

that component as the input source. If your DVD player

is connected to the TX-SR502/TX-SR502E’s multichan-

nel input, you must press the [MULTI CH] button to

enjoy all channels (see page 34). This is because the

Direct Change function only selects the FRONT

DVD IN sockets.

Remote Control

You can use the TX-SR502/TX-SR502E’s remote con-

troller to control other -compatible Onkyo compo-

nents.

Notes:

• Push plugs in all the way to make good connections.

• Use only cables for connections. cables

are supplied with Onkyo players (DVD, CD, etc.).

• Some components have two sockets, you can con-

nect either one to the TX-SR502/TX-SR502E. The

other is for connecting additional -compatible

components.

• Connect the TX-SR502/TX-SR502E’s socket to

only Onkyo components. Connecting to other manu-

facturer’s components may cause them to malfunc-

tion.

• Some components may not support all functions.

Refer to the manuals supplied with your components.

The TX-SR502/TX-SR502E has AC outlet on its rear

panel for connecting the power cord of another AV com-

ponent. The other component’s power switch can be left

in the ON position so that it turns on or off when the

TX-SR502/TX-SR502E is set to On or Standby.

Caution:

• Make sure that the capacity of the component that you

connect to the AC OUTLET does not exceed the stated

capacity (e.g., 100 W).

Note:

• Onkyo components with sockets should be con-

nected to regular wall outlets.

• The connector type and capacity will depend on the

country in which you purchased the TX-SR502/

TX-SR502E.

Notes:

• Before connecting the power cord, connect all of

your speakers and AV components.

•Turning on the TX-SR502/TX-SR502E may cause a

momentary power surge that might interfere with

other electrical equipment on the same circuit. If this

is a problem, plug the TX-SR502/TX-SR502E into a

different branch circuit.

Connecting Onkyo Components

To use , you must make an analog audio

connection (RCA) between the TX-SR502/

TX-SR502E and the other component, even if

they are connected digitally.

ANTENNA

OPTICAL COAXIAL

123

DIGITAL

REMOTE

CONTROL

IN IN

FRONT

SURR

CENTER

SUB

WOOFER

OUT

VIDEO 2

VIDEO 1

DVD MONITOR

OUT

VIDEO

S VIDEO

DVD

TAPE

VIDEO 2

VIDEO 1

SUBWOOFER

PRE OUT

VIDEO 1

/2/3IN

DVD

COMPONENT VIDEO

OUT

FRONT

DVD

REMOTE

CONTROL

ANALOG

AUDIO OUT

ANALOG

AUDIO OUT

e.g., CD player

e.g., DVD player

Connecting the Power Cords of Other

Components

Connecting the Power Cord

AV RECEIVER

MODEL NO. TX

502

AC OUTLET

AC 120

V 60

SWITCHED

120

W 1

MAX.

FRONT

SPEAKERS A

SURROUND

SPEAKERS

CENTER

SPEAKER

SURROUND BACK

SPEAKER

FRONT

SPEAKERS B

Class 2 Wiring

AC OUTLET

AC 120

V 60

SWITCHED

120

W 1

MAX.

SWITCHED

100W MAX.

AC OUTLET

European and some

Asian models

American model

TX-SR502_En.book Page 30 Tuesday, February 17, 2004 12:14 PM

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 59 60

Comments to this Manuals

No comments

Audiovox D2016 - DVD Player - 10.2 Instruction Manual Page 30

Comments to this Manuals

Related products and manuals for AV receivers Audiovox D2016 - DVD Player - 10.2