Audiovox D2016 - DVD Player - 10.2 Instruction Manual download pdf (Page 47)

Advanced Function

—Continued

0 to 5

: Adjustable range.

When set to 5, nothing is subtracted from the left and

right channels. When set to 0, the left and right chan-

nel levels are halved (–6 dB), making the center

channel more dominant, particularly useful when the

listener is off-center.

This function has no effect on the level of the center

speaker.

Adjusting the PL II or PL IIx Music Mode

The following Panorama, Dimension, and Center Width

parameters can only be adjusted while the PL II Music or

PL IIx Music listening mode is selected.

These parameters cannot be adjusted if you’re using the

Pro Logic IIx listening mode for 6.1-channel playback

from a 5.1-channel source.

■

Panorama

With this function, you can extend the front stereo image

to the surround speakers to provide a “wraparound”

effect, especially useful when not much sound is being

output by the surround speakers.

■

Dimension

With this function, you can move the soundﬁeld back-

ward or forward.

0 to 6:

Adjustable range.

When set to 3, the soundﬁeld is in the normal posi-

tion. Choose a lower setting to move the soundﬁeld

forward Choose a higher setting to move it back-

ward.

If the stereo image is too wide, or there’s too much sur-

round information, try moving the soundﬁeld forward to

achieve a better balance. If the stereo image is too nar-

row, or it sounds almost like it’s in mono, try moving the

soundﬁeld backward.

■

Center Width

With Pro Logic II/Pro Logic IIx decoding, the center-

channel signal is normally output by the center speaker.

If a center speaker is not used, the decoder divides the

center signal equally between the front left and right

speakers, producing what’s known as a “phantom” cen-

ter. With this function you can choose to have the center-

channel signal output by the center speaker only, by the

front left and right speakers only (“phantom” center), or

by a mix of the two.

0 to 7:

Adjustable range.

When set to 0, the center-channel signal is output by

the center speaker only. When set to 7, it’s output by

the front left and right speakers only (“phantom”

center).

In home theaters, adding some width to the center chan-

nel can improve the balance between the center and front

left and right speakers. Most stereo material will beneﬁt

from appropriate use of this function.

The following table shows the display indicators for each

supported digital signal format.

Normally, the TX-SR502/TX-SR502E detects the signal

format automatically. However, if you experience either

of the following issues when playing PCM or DTS mate-

rial, you can set the signal format to PCM or DTS:

• If the beginnings of tracks from a PCM source are cut

off, try setting the format to PCM.

• If noise is produced when fast forwarding or reversing

a DTS CD or LD, try setting the format to DTS.

Digital Input Signal Formats

Format Display

Dolby Digital

DTS

PCM

Press and hold the TX-SR502/

TX-SR502E’s [DIGITAL INPUT] button on

the front panel for about 3 seconds.

While “Auto” is displayed (about 3 sec-

onds), use the Left and Right [ ]/[ ] but-

tons to select: PCM, DTS, or Auto.

DTS or PCM;

the DTS or PCM indicator,

depending on which format you have set, ﬂashes,

and only signals in that format are output. Digital

signals in other formats are ignored.

Auto (default);

the format is detected automati-

cally. If no digital input signal is present, the cor-

responding analog input is used instead.

STANDBY/ON

PHONES

STANDBY

DISPLAYTONE TUNING MODEDIGITAL INPUT

LISTENING

MODE

STEREO

MEMORY

RETURNSETUP

VIDEO 2

TAPE TUNER

VIDEO

DVD

VIDEO

VCR

MULTI CH

MASTER VOLUME

TUNING

ENTER

PRESET

S VIDEO

VIDEO

AUDIO

VIDEO 3

INPUT

CLEAR

SPEAKERS BA

DIGITAL INPUT

TX-SR502_En.book Page 47 Tuesday, February 17, 2004 12:14 PM

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 59 60

Comments to this Manuals

No comments

Audiovox D2016 - DVD Player - 10.2 Instruction Manual Page 47

Comments to this Manuals

Related products and manuals for AV receivers Audiovox D2016 - DVD Player - 10.2