Audiovox D2016 - DVD Player - 10.2 Instruction Manual download pdf (Page 49)

Advanced Setup

—Continued

Notes:

• The Center and Subwoofer distances can be set up to

5 ft. (1.5 m) more or less than the Front distance. For

example, if the Front distance is set to 20 ft. (6 m), the

Center and Subwoofer distances can be set between 15

and 25 ft. (4.5 and 7.5 m).

• The SurrRight, Surr Left, and Surr Back distances can

be set up to 5 ft. (1.5 m) more or 15 ft. (4.5 m) less

than the Front distance. For example, if the Front dis-

tance is set to 20 ft. (6 m), the SurrRight, Surr Left,

and Surr Back distances can be set between 5 and 25

ft. (1.5 and 7.5 m).

With this function you can adjust the volume of each

speaker so that all speakers can be heard equally at the

listening position.

Notes:

• This procedure can also be performed by using the

remote controller. First press the [TEST TONE] but-

ton to output the test tone. Use the [LEVEL–] and

[LEVEL+] buttons to adjust the levels, and use the

[CH SEL] button to select the speakers.

Use the Left and Right [ ]/[ ]

buttons to specify the distance

for “Front,” then press the Down

[] button to select the next

speaker.

Repeat step 5 for all speakers.

Note:

Speakers that you set to No or None in

the Speaker Conﬁguration (page 32)

cannot be selected.

Press the [SETUP] button.

Setup closes.

Speaker Levels

Press the [AMP] button followed

by the [SETUP] button on the

remote controller.

ENTER

Speaker levels cannot be set while the

TX-SR502/TX-SR502E is muted.

AMP

Use the Up and Down [ ]/[ ]

buttons to select “3. Level Cal,”

and then press the [ENTER] but-

ton.

A pink noise test tone is output by the

front left speaker.

Turn up the volume so that you

can hear the test tone sufﬁ-

ciently.

While each speaker outputs the test

tone, its name appears on the display, as

shown.

Use the Left and Right [ ]/[ ]

buttons to adjust the speaker

level, and use the Down [ ] but-

ton to select the next speaker.

The level can be adjusted from –12 to

+12 dB in 1 dB steps (–15 to +12 dB

for the subwoofer).

Repeat step 4 so that the level of

the test tone from each speaker

is the same.

Speakers that you set to No or None in

the Speaker Conﬁguration (page 32) do

not output the test tone.

Press the [SETUP] button.

Setup closes.

Don’t forget to turn down the volume if

you turned it up while setting the levels.

ENTER

TX-SR502_En.book Page 49 Tuesday, February 17, 2004 12:14 PM

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 59 60

Comments to this Manuals

No comments

Audiovox D2016 - DVD Player - 10.2 Instruction Manual Page 49

Comments to this Manuals

Related products and manuals for AV receivers Audiovox D2016 - DVD Player - 10.2