Audiovox AFX-35.00 Installation Manual download pdf (Page 15)

128-8971a

15 of 32

3 Wire Ground Switched Door Lock Circuits:

In this application, the Red wire of the door lock harness provides a ground pulse during the arming se-

quence, or pulsed ground lock output. Connect the Red wire to the low current ground signal wire from the

factory door lock switch to the factory door lock relay.

The Green wire of the door lock harness provides a ground pulse during the disarming sequence, or pulsed

ground unlock output. Connect the Green wire to the low current ground signal wire from the factory door

unlock switch to the factory door unlock relay. See the following diagram for Wiring Detail.

3 WireGround Switched Door Lock/Unlock Wiring Detail

3 Wire Positive Switched Door Locks:

In this application, the Red wire of the door lock harness provides a + 12 Volt pulse during the disarming

sequence, or pulsed 12 volt unlock output. Connect the Red wire to the low current 12 Volt signal wire from

the factory door unlock switch to the factory door unlock relay.

The Green wire of the door lock harness provides a + 12 Volt pulse during the arming sequence, or pulsed

12 Volt lock output. Connect the Green wire to the low current 12 Volt signal wire from the factory door lock

switch to the factory door lock relay. See the following diagram for Wiring Detail.

3 Wire Positive Switched Door Lock/Unlock Wiring Detail

NOTE: Resistive Circuits, Multiplex Circuits As Well As 4 Wire Polarity Reversal and 5 Wire

Alternating 12 Volt Door Lock Control Circuits

These applications require the use of additional components which may include relays, fixed resistors, or for

convenience, a Door Lock Interface. Refer to the AUDIOVOX Door Lock Wiring Supplement and or the

Audiovox fax back service for information on your particular vehicle for properly connecting to these types of

circuits.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 31 32

No comments

Audiovox AFX-35.00 Installation Manual Page 15