Audiovox AFX-35.00 Installation Manual download pdf (Page 26)

128-8971a

26 of 32

COMPLETING THE INSTALLATION:

After you have confirmed the operation of the Audiovox Remote Start unit and tested all the safety

features of the system:

1. Mount the control module up and behind the dash securing it in place with cable ties or screws. Be

certain that the chosen mounting location will not inhibit any of the controls of the vehicle.

2. Securely harness and tie all wiring up and away from all hot and moving parts that they may come in

contact with under the dashboard or in the engine compartment areas.

CAUTION: Particularly avoid the area around the steering shaft and column, as wires can wrap around

these mechanisms and impair the safe operation of the vehicle.

3. Apply the Caution Labels supplied with this kit to a conspicuous area in the engine compartment.

Make sure to clean the surface before affixing the label.

4. Check the vehicle's wipers, lights, horn, etc.... to insure proper operation.

5. Replace all panels that were removed during installation, and retest the system.

6. Explain all activated features and safety systems associated with the Remote Start Unit installed. Also

point out the location of the Push-Button LED Override/Valet switch to the customer and explain its

operation.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 32

No comments

Audiovox AFX-35.00 Installation Manual Page 26