Audiovox CTV-5060 Service Manual Page 39

  • Download
  • Add to my manuals
  • Print
  • Page
    / 324
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 38
39
Sofa Motor Control Module
1. Unplug 2 connectors from module
2. Remove screws from base
TV
1. Remove VCP Faceplate:
Remove VCP trim ring.
Remove faceplate screws and remove faceplate.
2. Remove Storage Box Faceplate:
Open storage compartment door and remove faceplate screws.
Remove faceplate.
3. Removal of TV Lower Trim Piece:
Remove TV Lower Trim Piece Screws.
Remove TV Lower Trim Piece.
4. Remove screws from TV brackets.
5. Grasp TV and pull outward until connections are exposed.
6. Disconnect all connections, remove TV.
VCP
1. Remove VCP Faceplate:
Remove VCP trim ring.
Remove faceplate screws and remove faceplate.
2. Remove screws from VCP brackets.
3. Grasp VCP and pull outward until connections are exposed.
4. Disconnect all connections, remove VCP.
Wall, Deluxe
1. Open smart block fuse door. Disconnect smart block harness from smart block. Re-
position harnesses through cut out in compartment.
2. Remove hidden screws behind fuse block.
3. Remove screws from windowsill plate and remove.
4. Reach through opening in windowsill and disconnect connector from rear of CD
player and/or rear radio (if equipped).
5. Grasp CD player/ rear radio and remove (if equipped).
6. Remove rear screw from top of deluxe-wall sill, untuck fabric from rear corner and
remove hidden screw.
7. Untuck fabric at front of deluxe wall and remove hidden screw under fabric,
* (Untuck fabric by placing putty knife under edge and prying gently out, grasp fab-
ric to expose screw).
8. Lift straight up on deluxe-wall approximately 2” to release from cleat. Continue lifting
upward and remove.
Page view 38
1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 323 324

Comments to this Manuals

No comments