Audiovox CTV-5060 Service Manual download pdf (Page 55)

1997/1998 Dodge/ Plymouth

Caravan / Voyager

Center Beam

1. Remove 6 screws from beam.

2. Lower down.

3. Disconnect mate-n-lock for reading lights (2 sets).

4. Disconnect wiring for indirect light 2 wires.

1. Remove faceplate (refer to faceplate removal procedure).

2. Remove screws from top of CD attaching it to backer.

3. Disconnect plug in connector.

Cooler

1. Remove lid.

2. Lift cooler out of frame.

3. Remove screws from exposed brackets.

4. Lift frame, up and out.

* Note

When reinstalling cooler use care not to run screws into factory wiring harness

located under carpeting and silicone must be placed around drain tube.

Faceplate

1. Remove the face of the radio or remove the radio trim and then the radio, as appli-

cable.

2. Remove the radio by inserting the key (provided with the vehicle upon delivery) and

twisting clockwise. This releases the lock. Pull radio out to remove.

3. Remove 6 screws from faceplate bottom strip.

4. Remove 2 screws from faceplate.

5. Grasp faceplate at bottom edge and pull outward tilting past the CD player, Rear

radio and VCP (use caution not to tear the fabric on the canoes when performing

this procedure).

6. Pull downward at this time releasing faceplate.

Game Ready

1. Unsnap bezel.

2. Remove screws.

3. Pull straight out.

4. Disconnect wiring.

Headphone Station

1. Unsnap bezel.

2. Remove 4 screws.

3. Pull straight out.

4. Disconnect mate-n-lock connector.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 323 324

No comments

Audiovox CTV-5060 Service Manual Page 55